The 5th Airborne Premium 5th Wheel Air Ride King Pin w/ Sidewinder and Turret, # RP61412 has a universal locking wedge included that fits most 5th wheel hitches, some hitches from other manufacturers may require a custom wedge. view full answer...
Yes if you wanted to install the Electric Jack w/ Footplate # EJ-3520-BBX that you referenced turned at a different angle you certainly could since the bolt pattern allows for that. view full answer...
The two panels of the Classic Accessories Toy Hauler Screen for Fiberglass or Aluminum Toy Hauler # 052963799842 have a zipper that you can unzip to pull your UTV in or out of the trailer. The panels connect to the opening of the trailer door with "rip-and-grip" strips (Velcro) so if you ended up catching it with your UTV it would just pull off and could be easily reattached. view full answer...
The light for the Bulldog Powered Drive Trailer Jack # BD500187 can be turned off by flipping the on/off switch on the left of the face to the off position. view full answer...
The Replacement Front Panel Module for Furrion 2-in-1 Range Oven # FR68NR does not come with instructions. If you are comfortable with DIY projects then you'll probably be able to piece it back together but if you feel like this would be out of your league then I definitely recommend contacting a shop to help you out. view full answer...
We have the Ceiling Garnish for Ventline Roof Vent # Item # VA0445-29 which has rounded corners and is Birch white which is an off-white color. I attached a review video for this for you to check out as well. view full answer...
The Atwood Air Command Rooftop RV Air Conditioner w/ Heat Pump - 15,000 Btu - Ducted # AT15028-22 does not allow you to adjust the temperature variance by a degree or two prior to the air turning back on. It is a very basic control, so it does not offer that variance to keep the unit from turning off and on so often. view full answer...
Although we do not have the instructions for the Replacement Controlled Motion Hinge for RV Entry Door # LC95VR that you mention I was able to get in contact with Lippert, and they were able to send over the instructions.
The instructions are as follows:
1.Find the center between the existing top hinge and the middle hinge and middle hinge and bottom hinge on the
outer frame and mark this spot.
2. Next, Spread open the hinge leafs 1, 3 and 5 that attach to the outer frame from leafs... view full answer...